Poly Bundlers and Accessories
Innovative Accessories, Reliable Results
Poly Bundlers and Accessories
- Increase Max Package height by 4″ SE600 and 800 models only. Increase Tunnel height by 4″ SE600 & 800 only.
- Increase tunnel height to 24″ SE1100 & SE1500 only
- Compression Rollers at end of tunnel chamber to mat down poly film
- 2 Leister hot air guns with bottom side guide rails lift bottom sheet of poly and attaches to top sheet of film via heat gun. Package will now be fully enclosed in film. When used with compression rollers at end of tunnel package appearance is greatly improved.
Low Film Alarm - Dual Pusher Infeed-For AU models only. Will increase production rate 60% from 15 to 24 PPM on single stroke Applications. For SFE-600AU and SFE-800AU
- Dual Pusher Infeed-For AU models only. Will increase production rate 60% from 15 to 24 PPM on single stroke Applications. For SFE-1100AU and SFE-1500AU
- Product stacker, speeds of up to 200 pieces per minute.
- Dual Lane diverter-Accumulates product and makes one push for higher speeds.
- Tunnel Options Increase Tunnel Height by 4″ on Models 600 and 800. Add 12″ length to any tunnel.
- Increase Tunnel height to 24″ on SF-1100 and 1500 models only.
- “S” Version-Dual Blower to any Tunnel To Double Tunnel Length and Add One Blower
- Non Standard Voltage 480 volt 3 phase